UC120-2O1L Hybrid IP PBX Up to 2 FXO Port 1 LTE Channel

Scroll over the image to zoom in closer


Openvox UC120-2O1L designed for SME and SOHO users. It supports up to 2 FXO ports and 1 LTE channel.

This IPPBX allows to register 30 users and supports 15 concurrent calls (G.711A/U) and 5 concurrent calls (G.729).

  • Description

  • Features

  • OpenVox UC120-2O1L Series IPPBX is a new generation Unified Communication terminal equipment that combines voice and data. It is compact and lightweight, and provides following voice interfaces: FXO, LTE and Φ3.5 audio interface. It is compatible with multiple service platforms and terminals and can seamlessly connect to VoIP networks, traditional telephone networks (PSTN).

    On the one hand, the UC120-2O1L connects to traditional analog PBXs via a standard voice interface; on the other hand, it uses the standard SIP protocol and is compatible with most IPPBX, soft switch and SIP-based network platforms..

    As one of the product features, the product combines a Φ3.5 audio port, which can be directly connected to a computer headset for voice calls.

    In addition, it has high-speed data capabilities, allowing users to high-speed Internet access via the WAN (LAN1) / LAN (LAN2) interface.

    UC120-2O1L can be used as a personal communication product, and can also be used as a centralized communication product for SME, providing high-speed Internet access, enterprise voice communication.

  • Physical Specification

    • FXO: 2
    • LTE: 1
    • Network Interface: 2 10/100 Base-T RJ45

    Voice Feature

    • VoIP Protocols: SIP over UDP/TCP/TLS, SDP, RTP/SRTP PPTP VPN
    • Supported Codecs: G.711a/μ law, G.723.1, G.729A/B, GSM,G.726, G.722, SPEEX, ADPCM, iLBC
    • Silence Suppression
    • Comfort Noise Generator (CNG)
    • Voice Activity Detection (VAD)
    • Echo canceller(G.168), Maximum 128ms
    • Adaptive Dynamic Buffering
    • Adjustable Gain Control
    • Automatic Gain Control
    • Call Proceeding Tone: Dial Tone, Ring-back Tone, Busy Tone
    • Support NAT Traversal
    • DTMF Mode: RFC2833/Signal/Inband

    Mobile Feature

    • GSM: 850/900/1800/1900MHz
    • LTE: LTE FDD: B1/B3/B5/B8LTE TDD: B38/B38/B40/B41
    • SIM/UIM: each channel supports 1 SIM/UIM
    • SIM Card Voltage:1.8V, 3.0V
    • Antenna:3.0dB, SMA interface

    Additional Service

    • Call Forwarding (Unconditional/No Reply/Busy/Not Reachable)
    • Call Waiting/Holding
    • Call Transfer
    • Intra-group Pickup
    • Hotline
    • Do Not Disturb (DND)
    • Tripartite Meeting


    • Interface Type:RJ11
    • Caller ID Detection: FSK, DTMF
    • Reversed-Polarity Detection
    • Delayed Response Off-hook
    • Busy Tone Detection
    • No Current Hang-up Detection

    Software Feature

    • Interface Type: RJ11
    • Ring Group
    • Routes Group
    • Calling/Called Number Transform
    • Time Condition
    • Based on Destination Routing
    • Based on Source Routing
    • Dial Plan
    • Failover Routing
    • FXO Impedance Matching
    • Customizable Mult-language IVR
    • Auto Attendant Function
    • Local CDR Storage

    Management & Maintenance

    • Simple and convenient configuration via Web GUI
    • CLI Management Config
    • Support configuration flies backup and upload
    • Support Chinese and English page
    • Firmware Update by HTTP/TFTP
    • Auto Provision Update
    • Modify Password via Web & Telnet
    • CDR Query & Export
    • Syslog Query & Export
    • Ping and Tracer Test
    • Traffic Statistics: TCP, UDP, RTP
    • Network Capture/Network Quality Test
    • Automatic Time synchronization

Why Sip4U?

Here you can find best brands